View 74F3653673_970940.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74F365, 74F367 Hex buffers/drivers
Product specification Supersedes data of 1999 Jan 08 IC15 Data Handbook 2000 Jun 30
Philips Semiconductors
Philips Semiconductors
Product specification
Hex buffers/drivers
74F365, 74F367
FEATURES
* High-impedance NPN base inputs for reduced loading
(20A in High and Low states)
TYPE 74F365, 74F367
TYPICAL PROPAGATION DELAY 5.0ns
TYPICAL SUPPLY CURRENT (TOTAL) 36mA
* High-speed * Bus oriented * 3-State buffer outputs sink 64mA
ORDERING INFORMATION
COMMERCIAL RANGE DESCRIPTION 16-pin plastic DIP 16-pin plastic SO VCC = 5V 10% 10%, Tamb = 0C to +70C N74F365N, N74F367N N74F365D, N74F367D PKG DWG # SOT38-4 SOT109-1
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
PINS I0 - I5 OE0, OE1 DESCRIPTION Inputs Output enable inputs (active Low) 74F(U.L.) HIGH/LOW 1.0/0.033 1.0/0.033 LOAD VALUE HIGH/LOW 20A/20A 20A/20A 15mA/64mA
Y0 - Y5, Y0 - Y5 Data Outputs 750/106.7 NOTE: One (1.0) FAST Unit Load (U.L.) is defined as: 20A in the High state and 0.6mA in the Low state.
PIN CONFIGURATION
74F365 OE0 1 I0 Y0 I1 Y1 I2 Y2 GND 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC OE1 I5 Y5 I4 Y4
LOGIC SYMBOL (IEEE/IEC)
74F365 1 15 & EN
2 4 6 10
3 5 7 9 11 13
I3 12 Y3 14
SF00899
SF00901
LOGIC SYMBOL
74F365 2 4 6 10 12 14
PIN CONFIGURATION
74F367 OE0 1 I0 I0 I1 I2 I3 I4 I5 Y0 I1 Y1 Y1 Y2 Y3 Y4 Y5 I2 Y2 GND 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC OE1 I5 Y5 I4 Y4 I3 Y3
1 15
OE0 OE1 Y0
VCC = Pin 16 GND = Pin 8
3
5
7
9
11
13
SF00900
SF00905
2000 Jun 30
2
853-0042 24024
Philips Semiconductors
Product specification
Hex buffers/drivers
74F365, 74F367
LOGIC SYMBOL
74F367 2 4 6 10 12 14
LOGIC SYMBOL (IEEE/IEC)
74F367 1 15 EN1 EN2
I0 1 15 OE0 OE1 Y0
I1
I2
I3
I4
I5
2 4 6
1
3 5 7 9
Y1
Y2
Y3
Y4
Y5
10 12 14 2
11 13
VCC = Pin 16 GND = Pin 8
3
5
7
9
11
13
SF00906
SF00907
LOGIC DIAGRAMS
74F365 OE0 1 OE1 15 3 OE0 1 74F367
I0
2
Y0
I0
2
3
Y0
I1
4
5
Y1
I1
4
5
Y1
I2
6
7
Y2
I2
6
7
Y2
I3 10
9
Y3
I3 10 OE1 15
9
Y3
I4 12
11 Y4
I5 14
13 Y5
I4 12
11 Y4
I5 14 VCC = Pin 16 GND = Pin 8
13 Y5
SF01442
FUNCTION TABLE for 74F365
INPUTS OE0 OE1 In L H X X L L L L X H H X High voltage level Low voltage level Don't care High impedance "off" state L H Z Z OUTPUTS Yn Yn H L Z Z
FUNCTION TABLE for 74F367
INPUTS OEn In Yn L H Z L L L H H X High voltage level Low voltage level Don't care High impedance "off" state OUTPUTS Yn H L Z
H L X Z
= = = =
H L X Z
= = = =
2000 Jun 30
3
Philips Semiconductors
Product specification
Hex buffers/drivers
74F365, 74F367
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb Tstg Supply voltage range Input voltage range Input current range Voltage applied to output in High output state range Current applied to output in Low output state Operating free-air temperature range Storage temperature range PARAMETER RATING -0.5 to +7.0 -0.5 to +7.0 -30 to +5 -0.5 to 5.5 128 0 to +70 -65 to +150 UNIT V V mA V mA C C
RECOMMENDED OPERATING CONDITIONS
SYMBOL VCC VIH VIL IIK IOH IOL Tamb Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free-air temperature range 0 PARAMETER LIMITS MIN 4.5 2.0 0.8 -18 -15 64 70 TYP 5.0 MAX 5.5 V V V mA mA mA
oC
UNIT
2000 Jun 30
4
Philips Semiconductors
Product specification
Hex buffers/drivers
74F365, 74F367
DC ELECTRICAL CHARACTERISTICS
Over recommended operating free-air temperature range unless otherwise noted. SYMBOL PARAMETER TEST CONDITIONS1 VCC = MIN, VIL = MAX, VIH = MIN, IOH = -3mA VO OH High-level High level output voltage VCC = MIN, VIL = MAX, VIH = MIN, IOH = -15mA VO OL VIK II IIH IIL IOZH IOZL IOS Low-level Low level output voltage Input clamp voltage Input current at maximum input voltage High-level input current Low-level input current Off-state output current, High-level voltage applied Off-state output current, Low-level voltage applied Short-circuit output current3 ICCH ICC Supply current (total) 74F365 74F367 ICCL ICCZ VCC = MAX VCC = MIN, VIL = MAX, VIH = MIN, IOL = MAX "10%VCC "5%VCC "10%VCC "5%VCC "10%VCC "5%VCC 0.42 -0.73 LIMITS MIN 2.4 2.7 2.0 2.0 0.55 0.55 -1.2 100 20 -20 50 -50 -100 25 47 35 -225 35 62 48 3.3 TYP2 MAX V V V V V V V A A A A A mA mA mA UNIT
VCC = MIN, II = IIK VCC = 0.0V, VI = 7.0V VCC = MAX, VI = 2.7V VCC = MAX, VI = 0.5V VCC = MAX, VO = 2.7V VCC = MAX, VO = 0.5V VCC = MAX
mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last.
AC ELECTRICAL CHARACTERISTICS
LIMITS SYMBOL PARAMETER TEST CONDITIONS TA = +25C VCC = +5.0V CL = 50pF, RL = 500 MIN tPLH tPHL tPZH tPZL tPZH tPZL tPHZ tPLZ Propagation delay In to Yn Output Enable time to High or Low level Output Enable time to High or Low level Output Disable time from High to Low level 74F365, 74F367 74F365 74F367 Waveform 2 Waveform 3 Waveform 4 Waveform 3 Waveform 4 Waveform 3 Waveform 4 2.5 2.5 2.5 2.5 3.0 3.0 2.0 2.0 TYP 4.5 5.5 4.0 5.0 5.5 6.5 4.5 4.0 MAX 6.5 7.0 6.5 8.0 7.5 8.5 6.5 6.5 TA = -55C to +125C VCC = +5.0V 10% CL = 50pF, RL = 500 MIN 2.0 2.0 2.5 2.5 3.0 3.0 2.0 2.0 MAX 7.0 7.5 7.5 8.5 8.5 9.0 7.0 7.0 ns ns ns ns ns ns ns ns UNIT
2000 Jun 30
5
Philips Semiconductors
Product specification
Hex buffers/drivers
74F365, 74F367
AC WAVEFORMS
For all waveforms, Vm = 1.5V
In VM tPHL Yn VM VM tPLH Yn VM
In
VM tPLH VM
VM tPHL VM
SF00912
SF00914
Waveform 1. For Inverting Outputs
Waveform 2. For Non-Inverting Outputs
OE
VM tPZH
VM tPHZ VM 0V VOH -0.3V
OE
VM tPZL VM
VM tPLZ
3.5V
Yn, Yn
Yn, Yn
SF00913
VOL +0.3V
Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level
SF00915
Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level
TEST CIRCUIT AND WAVEFORM
VCC 7.0V VIN PULSE GENERATOR RT D.U.T. VOUT RL NEGATIVE PULSE 90% VM 10% tTHL (tf ) CL RL tTLH (tr ) 90% POSITIVE PULSE 10% tTHL (tf ) AMP (V) 90% VM tw 10% 0V tw VM 10% tTLH (tr ) 0V AMP (V)
90%
Test Circuit for 3-State Outputs SWITCH POSITION TEST tPLZ tPZL All other SWITCH closed closed open
VM
Input Pulse Definition
DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators.
INPUT PULSE REQUIREMENTS family amplitude VM 74F 3.0V 1.5V rep. rate 1MHz tw 500ns tTLH 2.5ns tTHL 2.5ns
SF00777
2000 Jun 30
6
Philips Semiconductors
Product specification
Hex buffers/drivers
74F365, 74F367
DIP16: plastic dual in-line package; 16 leads (300 mil)
SOT38-4
2000 Jun 30
7
Philips Semiconductors
Product specification
Hex buffers/drivers
74F365, 74F367
SO16: plastic small outline package; 16 leads; body width 3.9 mm
SOT109-1
2000 Jun 30
8
Philips Semiconductors
Product specification
Hex buffers/drivers
74F365, 74F367
NOTES
2000 Jun 30
9
Philips Semiconductors
Product specification
Hex buffers/drivers
74F365, 74F367
Data sheet status
Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 2000 All rights reserved. Printed in U.S.A. Date of release: 06-00 Document order number: 9397-750 07283
Philips Semiconductors
yyyy mmm dd 10

▲Up To Search▲

Price & Availability of 74F3653673

	To Download 74F3653673 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .